How To Refresh Artificial Grass?

Artificial grass is preferred by homeowners because of its ability to remain healthy and presentable despite its low maintenance requirements.

Having said that, you must still keep an eye on your lawn to guarantee that it lasts the whole duration of its life. We’d like to look at how to refresh an artificial grass lawn.

If you’ve traded expensive water bills, allergens, and hours spent sweating away the summer months grooming real grass for the ease, convenience, and consistent beauty of artificial grass, the truth is that your artificial turf still need some care and maintenance to keep it looking good. Fortunately, it’s simple enough to complete on your own.

Artificial Grass Has Unique Needs

Artificial grass isn’t subjected to the same hazards as natural grass, and it doesn’t require the same level of upkeep. Although an artificial lawn is not prone to weeds or diseases/fungi, it can risk other wear and tear in high-traffic areas, as well as weather damage. Just because it’s man-made doesn’t mean it won’t need time and effort to maintain once it’s in place.

Although an artificial lawn is not prone to weeds or diseases/fungi, it can risk other wear and tear in high-traffic areas, as well as weather damage. Just because it’s man-made doesn’t mean it won’t need time and effort to maintain once it’s in place.

Artificial Grass Care and Maintenance

Artificial turf maintenance entails keeping track of what occurs to your lawn on a daily basis. Even fake grass will require stain control due to children, dogs, and the outdoors. Spills and stains in artificial grass must be resolved in order to maintain the quality look and feel of your artificial turf. Unlike real grass, where food, pet, or oil stains would eventually grow out or be mowed away, spills and stains in artificial grass must be resolved in order to maintain the quality look and feel of your artificial turf.

Even fake grass will require stain control due to children, dogs, and the outdoors. Spills and stains in artificial grass must be resolved in order to maintain the quality look and feel of your artificial turf. Unlike real grass, where food, pet, or oil stains would eventually grow out or be mowed away, spills and stains in artificial grass must be resolved in order to maintain the quality look and feel of your artificial turf.

For Mild Stains

Life occurs, and it frequently occurs on grass. At some point during a backyard BBQ, a plate will fall to the ground, an alcoholic beverage will be knocked over, or a pet will leave his mark someplace in the yard. Cleaning and caring for stains such as cola, alcohol, urine, blood, coffee, tea, and other commonplace chemicals is quite straightforward. You’ll have to:

At some point during a backyard BBQ, a plate will fall to the ground, an alcoholic beverage will be knocked over, or a pet will leave his mark someplace in the yard. Cleaning and caring for stains such as cola, alcohol, urine, blood, coffee, tea, and other commonplace chemicals is quite straightforward. You’ll have to:

You’ll have to:

Be on time. The best method to ensure that a spill does not create a long-lasting, tenacious stain is to clean it up as soon as possible.

Using a towel or a dry absorbent such as kitty litter, blot up the spilled liquid.

Use a mixture of water and a light home detergent to rinse the area. The fibers will not be harmed.

Instead of using household detergent, try a 3 percent solution of ammonia in water if you need a stronger stain remover.

Rinse the cleaner well with clean, cool water.

For Stubborn Stains

Motor oil, grease, pen ink, cooking oil, suntan oil, and crayon can all get up on your lawn, and they’re usually a little more tenacious than the commonplace items mentioned above. If moderate home detergents or an ammonia mixture don’t work, try using mineral spirits to remove the stain. With mineral spirits, the cleaning procedure is similar: gently rinse the area and blot away any extra liquid.

For the Really Sticky Stuff

Tree sap and chewing gum can also get trapped in artificial turf, but they’re quite straightforward to get out. The sap or gum can be frozen off with dry ice or spray refrigerants, then scraped off the grass.

Removing Pet Waste

Pets don’t necessitate continuous cleaning and rinsing of your fake grass; pet waste removal is simple. Simply:

Let solid waste dry before disposing of it.

The majority of liquid will drain via artificial grass. Soak the lawn in cool water from a hose on pee stains if you want to avoid a stink.

Although most stains on artificial grass can be removed, it’s still preferable to avoid stains and damage to the turf in the first place. For example, in addition to keeping substances that may stain the grass far away or secured, keep cigarettes and pyrotechnics away from artificial turf, and avoid using powerful chemicals near the grass.

Maintaining Your Lawn for the Future

Aside from normal wear and tear and accidents, artificial turf owners can take a few simple precautions to ensure the quality and lifespan of their turf. Artificial turf can last anywhere from 15 to 25 years, depending on the use. Artificial turf will last longer if you follow a regimen of cleaning debris from the grass, rinsing it regularly, and cross brushing it.

Artificial turf can last anywhere from 15 to 25 years, depending on the use. Artificial turf will last longer if you follow a regimen of cleaning debris from the grass, rinsing it regularly, and cross brushing it.

Equipment You’ll Need

You’ll need a few basic tools to maintain and care for your fake grass on a regular basis. You’ll need a hose first and foremost; if you live in an area where it rains frequently, this is less of a necessary, but it’s still useful for rinsing the grass whenever you want. For removing falling leaves before they become ground into the artificial turf, use a leaf blower or a lawn vacuum. A rake will also help to maintain the grass fibers fresh and unmatted, but avoid using metal bristles and instead use synthetic or plastic bristles, which are less likely to damage the grass fibers.

You’ll need a hose first and foremost; if you live in an area where it rains frequently, this is less of a necessary, but it’s still useful for rinsing the grass whenever you want. For removing falling leaves before they become ground into the artificial turf, use a leaf blower or a lawn vacuum. A rake will also help to maintain the grass fibers fresh and unmatted, but avoid using metal bristles and instead use synthetic or plastic bristles, which are less likely to damage the grass fibers.

A rake will also help to maintain the grass fibers fresh and unmatted; however, avoid harming metal bristles and instead use synthetic or plastic bristles, which are far friendlier on artificial turf fibers.

Clean, Rinse, Brush, Repeat

Taking care of your artificial grass on a daily basis can be broken down into four simple stages. These procedures should be followed at least once a month, if not more frequently. They are as follows:

These procedures should be followed at least once a month, if not more frequently. They are as follows:

They are as follows:

Clear the grass of debris. This is especially crucial after storms or heavy winds. Keeping your lawn safe from injury means removing leaves, branches, and other debris.

Rinse the turf on a regular basis. To clear dust and pollen, use a hose filled with cool, clean water. If you live in a location where it rains frequently, you won’t have to use the hose quite as much.

In high-traffic areas, brush the grass against the grain. Cross brushing the grass against the grain can protect it from becoming matted and looking vigorous and fresh.

How do you refresh artificial grass?

Simply cleaning the grass with an ordinary broom will solve the problem. The fibers were only flat for a brief while, yet they will rise and be shown in all their grandeur. Your fake grass will appear to be fresh new once more.

How do you make fake grass look new?

Your artificial grass yard’s fibers should stand straight like genuine grass, and you want to preserve them that way. It takes a lot of traffic to flatten them, but frequent heavy activity by many pets or youngsters, as well as walking along the same path in a yard, can take a toll.

Hefty objects on the grass, such as inflatable pools, furniture, or heavy flower pots, may flatten the turf fibers. Over the years, they may simply begin to bend. Fortunately, restoring them to their upright position is simple.

A rake or a brush with synthetic bristles at least 5 inches long can be used. Wire or metal bristles should not be used since they can harm the fibers. To fluff up your turf strands, simply brush or rake them against the grain.

Raking or brushing your artificial grass lawn redistributes the blades, resulting in more even wear and a longer lifespan. Maintaining the fibers upright will help make your lawn appear more natural.

How to remove stubborn stains from artificial grass

We’ve all been there: you’ve spilled tea, wine, or ketchup on your artificial grass, but how can you clean it? We’re here to assist you!

Act promptly, removing as much of the spilled liquid as possible before it hardens.

Soak up any liquids using a clean cloth, kitchen towel, or kitty litter (if you have any) – any of these will absorb any liquid.

If the mark persists, mix a tiny amount of washing up liquid with lukewarm water. Use a synthetic bristles brush, a clean cloth, or a sponge to apply.

Apply the solution to the stained fibers in between and around them. Using a garden hose or a watering can, thoroughly rinse the area.

If the spillage has set, you may need to use a plastic spatula or a plastic knife to carefully remove it. You might also try gently brushing the discoloration away with a toothbrush.

Can you pressure wash artificial grass?

Power washing is a highly effective way to clean a range of exterior surfaces, including concrete and bricks, in a short amount of time. While power washing portions of your backyard, you may be tempted to also power wash your fake grass to ensure a thorough clean, which is not a bad idea. However, you should never use hot water to power wash a synthetic turf lawn since it could damage the yarn. A surface cleaning pressure washing attachment is the safest technique to power wash turf without blowing out all of the infill. Infill will be included in almost every home turf installation. If you use your typical wand to power wash your fake grass, you risk removing some or all of the infill product, jeopardizing the integrity of your artificial grass lawn. You could simply use TurFill or another form of coated silica sand to refill your infill system. Do not use basic silica sand as a filler. Use a garden hose to rinse away any dust or debris if your grass appears to be in need of a wash. Call the lawn cleaning experts at TurFresh if you still think it needs a deeper clean. Without causing any harmful side effects, our complete 10-point cleaning service will ensure that your synthetic grass looks sparkling clean and smells fresher than before.

Power washing is a highly effective way to clean a range of exterior surfaces, including concrete and bricks, in a short amount of time.

While power washing portions of your backyard, you may be tempted to also power wash your fake grass to ensure a thorough clean, which is not a bad idea.

However, you should never use hot water to power wash a synthetic turf lawn since it could damage the yarn.

A surface cleaning pressure washing attachment is the safest technique to power wash turf without blowing out all of the infill. Infill will be included in almost every home turf installation.

If you use your typical wand to power wash your fake grass, you risk removing some or all of the infill product, jeopardizing the integrity of your artificial grass lawn. You could simply use TurFill or another form of coated silica sand to refill your infill system.

Do not use basic silica sand as a filler. Use a garden hose to rinse away any dust or debris if your grass appears to be in need of a wash. Call the lawn cleaning experts if you still think it needs a deeper clean.

Can You Vacuum Artificial Grass?

Do you want to know how to clean a grass carpet? Non-infill turf is easy to vacuum with a standard vacuum cleaner. While this form of turf is most commonly found indoors, it can also be found outdoors. Vacuuming too often can cause the turf to tear or sag over time.

You can vacuum infill-filled turf as well, but you risk removing the infill, which keeps the turf looking springy and offers cushioning. Furthermore, infill can clog vacuums, so it’s best to avoid it. Turf vacuums are available, but we recommend brushing the turf rather than vacuuming it. An artificial turf brush or rake is the ideal artificial grass cleaning tool!

Why do you brush sand into artificial grass?

Long blades of decorative artificial grass range in height from 25mm to 45mm. To stand up straight, such grass blades require support. This is accomplished with the help of a 2cm deep layer of sand in goods without a thatch (synthetic moss or rootzone).

To generate the aesthetic appearance, a layer of white sand is layered on top of a layer of unique brown sand. There is a significant difference!

There are several advantages to using sand fill. These advantages apply to all forms of artificial grass, whether it has thatch or not.

The fake grass is weighed down by the sand, which is one of the purposes of the sand. The added weight ensures that the grass remains in place and does not require any further support.

The sand stabilizes the turf and protects it. As a result, there are no creases or folds as a result of use.

The sand also surrounds the artificial grass’s long blades, ensuring that they remain upright.

Filling with sand also helps to make the grass more fire resistant, which is useful in the event that the barbeque is knocked over onto the grass.

Regardless of the sort of fake grass you choose, we recommend that you constantly utilize sand fill (except for indoor use).

In the end, the artificial grass’s lifespan is extended.

You probably won’t anticipate it, but sand fill will make your fake grass look even better. Sand not only helps the fibers stand up straighter, but it also causes the fibres to stand in diverse positions, which looks more natural. With time, this benefit becomes more apparent. It slows down the flattening of your lawn caused by walking.

Artificial grass is made with a unique type of sand. This filling sand is not to be confused with ‘soil.’ The sand has been created specifically for this purpose.

The sand fill is free of weeds and does not provide a nutritious environment for them.

Because the sand fill does not absorb water, your lawn drains and dries fast after a rainstorm. It does not deteriorate into muck!

There is a lot of sand. It doesn’t blow away with the wind. To remove leaves from the grass, you can simply use a leaf blower.

Walking sand out of the grass won’t be a problem for you. The fibres have covered it.

Children may crawl around freely on the grass without being worried by sand.

Close-ups of the many types of fake grass are shown below. You may assume that in the absence of fake moss, sand is required to keep the grass strands standing straight.

You can observe how the moss supports the grass threads in the grass type with moss. It’s also worth noting that the fibres are ‘stomped flat’ every time they’re walked on. To a large extent, a thin coating of sand inhibits this.

Do I need to re-sand my artificial grass?

Should sand be used as a filler in artificial grass? The short answer is that it depends.

Many modern artificial grass products are designed to be Non-Infill, which means they don’t require sand infill. Please confirm with the manufacturer, as this varies from one supplier to the next.

You might be asking what sand infill is and why it’s been utilized with artificial grass in the past. For the following reasons, sand infill was often required for an artificial lawn:

To aid in the standing up of blades that are weak.

To keep the grass in place

To guard against UV deterioration

To make the artificial turf last longer.

Can you clean artificial grass with washing up liquid?

‘Is it possible to clean fake grass using dishwashing liquid?’ ‘Does my synthetic grass lawn need to be dried?’

There are many questions you may have about fake grass maintenance, so we’ve put up a handy list of a few crucial things to avoid while cleaning artificial grass, as well as why you should avoid them:

When it comes to artificial grass tools, avoid sharp things that could cut or damage the grass. If you’re trying to get something stuck or dried on your grass off, use a putty knife or something rough.

If you want to get rid of sticky material on your grass, don’t use harsh chemicals because this could harm the plastic. Instead, use dishwashing liquid, vinegar and water mixed half-and-half, or a synthetic grass cleaner. This also applies to pesticides! To get rid of any critters, simply use a hose.

If you’re tempted to use anything a little harsher on a tough patch, do a patch test on a corner of the grass or anywhere else where the chemicals won’t be seen to see how they react with the grass.

Avoid putting heat on your yard. After a hose down, it will dry naturally.

Do not vacuum your artificial grass with a household vacuum. This may not be good for the grass or the vacuum, and it may even be harmful to both. Instead, use a garden vacuum.

Can I use Zoflora on artificial grass?

Yes. The product is safe to use on a variety of surfaces, including artificial grass, as well as floors, carpets, walls, and decking.

What’s more, because Zoflora does not contain phenols, it is safe to use around most pets.